500|彩票一分快三平台

                                • Login
                                • Register
                                • 800-HPALLOY
                                • 1985 E 500 N Windfall, IN 46076
                                  444 Wilson St Tipton, IN 46072
                                  Post Office Box 40 Tipton, IN 46072
                                  tel:8004725569

                                Inconel 601 (UNS N06601) Description

                                Request a quote

                                Ni 61 Fe Bal Cr 23 Al 1.4 C 0.10 Mn 1.0 S 0.015 Si 0.5

                                High Performance Alloys stocks and produces Inconel 601 in this grade in the following forms: Bar, sheet, plate, coil and pipe. Request quote on this grade.

                                 

                                1. Download PDF - Or view as HTML
                                2. Download FDA statement concerning the use of stainless steels as food contact surfaces of equipment. 154 KB PDF

                                 

                                Overview

                                Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.

                                The limiting chemical composition of Inconel 601 is listed in Table 1. The composition is a face-centered-cubic solid solution with a high degree of metallurgical stability. The alloy’s nickel base, in conjunction with a substantial chromium content, provides resistance to many corrosive media and high-temperature environments. Oxidation resistance is further enhanced by the aluminum content.

                                 

                                Characteristics

                                • The most important property of Inconel 601 is resistance to oxidation at very high temperatures up to 1250C. Even under severe conditions such as, cyclical heating and cooling. This is possible due to Inconel 601 having a tightly adherent oxide layer which is resistant against spalling.
                                • Resistance to carburization is good, also resistant to carbon nitriding conditions.
                                • Due to high chromium and some aluminum content, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.

                                Applications

                                • Trays, baskets and fixtures used in various heat treatments such as carburizing and carbon nitriding.
                                • Refractory anchors, strand annealing and radiant tubes, high velocity gas burners, wire mesh belts etc.
                                • Insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.
                                • Thermal reactors in exhaust system of petrol engines.
                                • Fabricated combustion chambers.
                                • Tube supports and ash trays in the power generation industry.

                                Chemistry

                                Chemical Requirements

                                Ni

                                Cr

                                C

                                Mn

                                Si

                                S

                                Fe

                                Max

                                63.0

                                25.0

                                0.10

                                1.0

                                1.0

                                0.015

                                Bal

                                Min

                                58.0

                                21.0

                                 

                                Tensile Data

                                Mechanical Property Requirements

                                Ultimate Tensile

                                Yield Strength (0.2% OS)

                                Elong. in 2 in., or 50mm or 4D, min., %

                                R/A

                                Hardness

                                Cold Worked/Annealed

                                Min

                                80 KSi

                                30 KSi

                                30

                                Max

                                Min

                                550 MPa

                                205 MPa

                                Max

                                Hot Worked/Annealed

                                Min

                                80 KSi

                                30 KSi

                                30

                                Max

                                Min

                                550 MPa

                                205 MPa

                                Max


                                 

                                Specifications

                                Form

                                Standard

                                Metal Type

                                UNS N06601

                                Bar

                                ASTM B166 Din 17752

                                Wire

                                Sheet

                                ASTM B168 Din 17750

                                Plate

                                ASTM B168 Din 17750

                                Fitting

                                 

                                Forging

                                Din 17754

                                Weld Wire

                                FM 82

                                Weld Electrode
                                FM 617
                                Din
                                2.4851

                                 

                                Physical Properties

                                Density 8.1 g/cm cube
                                Specific Heat 461 J/kg K
                                Electrical Resistivity 119 micro ohms cm
                                Curie Temperature -190 C
                                Melting Range 1320 - 1370 C
                                Thermal Expansion(10-6K) 14.9 (20-300 C)

                                 

                                Machining

                                MACHINING DATA
                                Carbide tools are suggested
                                for rates better than 50% of Type 304.
                                Machining Type Suggested starting rates are:
                                Single Point turning : Roughing - 0.15" depth, 0.015"/rev feed -175 SFM
                                Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
                                Drilling : 1/4" Dia hole - 0.004"/rev feed - 60 SFM
                                1/2" Dia hole - 0.007"/rev feed - 60 SFM
                                3/4" Dia hole - 0.010"/rev feed - 60 SFM
                                Reaming : Feed - same as drilling - 100 SFM
                                Side and Slot Milling : Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM
                                Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM
                                These rates are for carbide tools,
                                Type C-2 for roughing, drilling and reaming.
                                Type C-3 for finishing.

                                 

                                INCONEL® is a registered trademark of the INCO family of companies.



                                <

                                                              search for

                                                              Foreign exchange

                                                              Real estate

                                                              Go abroad

                                                              image

                                                              education

                                                              society

                                                              aviation

                                                              game